Pages

Tampilkan postingan dengan label 2014. Tampilkan semua postingan
Tampilkan postingan dengan label 2014. Tampilkan semua postingan

Selasa, 15 Maret 2016

Metal Boat Festival 2014!


2014 Metal Boat Festival
Come to the Port of Anacortes, Washington, for the 27th annual Metal Boat Festival, August 8 - 10.

Metal Boat Festival

On August 8th - 10th, 2014, the 27th annual Metal Boat Festival will be held on the waterfront in Anacortes, Washington. The festival includes seminars with speakers covering various boat-related topics, which will be held at the Seafarers Memorial Park Building starting at 8:00am Friday morning and concluding mid-afternoon on Sunday. This is an opportunity for people interested in metal boats to see both homebuilt and professionally built boats, power and sail, and talk to the owners. There will also be metal boat designers as well as professional boat builders there for you to meet with. At the end of each speaking session there is a Q&A time. On Sunday there will be a Designers and Builders Forum where attendees can ask a panel of designers and builders any boat-related questions.

The Metal Boat Festival is open to everyone, Metal Boat Society members and non-members alike. For more information on seminar subjects and evening program speakers or to register go to www.metalboatsociety.org
Read More..

Kamis, 10 Maret 2016

Metal Boat Festival 2014 Seminar Paint Systems For Metal Boats

Paint Systems For Metal Boats














Read More..

Minggu, 28 Februari 2016

Our Part in the Harlem Yacht Club Cruise of 2014


Sunday Aug 3 - Work Day on the Mooring

The Club Cruise ran from Aug 1 to 10 but ILENEs part became five nights and five days, with three nights with the main contingent of the Club Cruise in Mattituck and the Seatauket YC on the North Shore of Long Island. I worked four hours the day before we got started. I found the missing green washer for the dinks air pump -- under the dink and made some progress on pumping it up, but it is not right yet. But we will be on anchor, on dock or on a mooring with launch service for this entire mini-cruise so the dink will not needed. So I moved the outboard from the cars trunk, the gas tank from the boat and the air pump from the dock -- all three to the locker with the oars I found located there buried under the winter covers. Also, I am not putting the water maker into service until we leave for the winter -- unless the manual says it cant remain pickled for a whole year. Id hate to foul up that expensive piece of machinery.

Other work included: (1) sawing the three pieces of veneered wood to close up the port aft cabinet to size, though installation requires return of our drill which was lent out; (2) cleaning birds mess off the dodger which needs more scrubbing. Actually is is not guano but fish guts, scales and bones -- birds being such messy eaters;
(3) attempting to knock out the booms thumb cleats, which was not successful, though I did learn that the first reefing line had been led through the forward part of the boom on the wrongside of the thumb cleat, which was what was causing the harm to the line. So by releading and repairing this line I may not have to do the knockout or replace the line; (4) locating and installing the hatch board bag and inserting the boards therein and installing the cafe doors. These doors put me psychologically into cruising mode. Im ready!

Mon August 4 - Prep Day and Sleep Aboard, Anticipating an Early Start

This was mostly a land day for prep, provisioning and packing. We loaded the car, including the cats, and arrived at the Club at 8:30 pm. After getting everything aboard and put away, we slept peacefully in calm water. This was the cats third trip to the boat this season and they did not complain about being locked in their stuffy carrier in the car. I think it is because they have associated the carrier with boating, which they seem to love. So much for my amateur feline psychiatry.
Whitty: "Do I look like Im worried"

Alphie: "Im Captain of all I survey"
Our efforts to keep out flying biting pests at night was thwarted by the cats ability to "break and enter" by pushing in the screens covering the small side opening ports. They want free rein of ILENEs cabin AND exterior, 24/7. But if we close these ports, the screens cannot be pushed through and the cats have to elect between the two sides of the boat: in or out.

Tues August 5 - HYC to Port Jeff Cove

Underway at 7:00 am for six hours. It was eerily still with mist on the water that the sun had not yet burned off but fine visibility. We were the only boat moving. We waved to some fishermen on the Morris YC dock. By nine a.m. there were a few other boats out but far away. We motored the entire way and never set a sail. Normally a sail will stabilize the boat against rocking but the seas were flat calm with occasional 2 or 3 knot winds, so rocking was not a problem. It was a day made for power boaters, who like flat seas, but not for sailors. Perhaps all that great wind in July has blown itself out and we will have to content ourselves with weak weather sailing conditions in August.  
Clouds and Northport stacks mirrored on the water

Our wake, if you can call it that, as if cut through oil
The last time I recall sailing with such views was crossing the Caicos Banks.  See blog: "Judy and Meridel and Turks and Caicos Part 1", April 3, 2012.



 We took someones mooring in the big cove to starboard just past the breakwater in Port Jeff, hoping the owners didnt show up that evening, but there are about seventy private moorings here and only five boats at the maximum. On a weekend its quite different. Lunch, a nap and then chores before dinner, reading and sleep.
My primary chore was removing, repairing and reinserting the first (red) reefing line. The strength of such a braided line is in its core. The outside, which we see, protects the core from chafing and makes it feel better in ones hands. The covering was all bunched around the two ends and about six feet of the white core, where it runs through the boom, were bare. So the first thing I did was to pull on the cover from the ends to the middle, over and over. Gradually the cover moved toward the middle until the bare spot was only about eight inches long. Then I sewed some light thread through the cover and the core, to try to hold things in place. Then red electrical tape was wound around the remaining exposed core. The reefing line certainly carries a heavy load. More experienced sailors who may think this is a bad idea, please chime in. Otherwise, time will tell if this red line parts, and if the storm is severe enough to do this to the red line, there is the second black reefing line waiting to take its load.
My other chore was installation of self adhesive rubber weatherstripping to the underside of the cover of the aft port lazarette -- the propane locker. Practical Sailor magazine told me that this compartment should be locked and watertight, except for a hole in the bottom, through which any propane that leaks from the tank, being heavier than air, could escape outside the boat. We have gotten some water in this lazarette, when heeled in the rain, because it was not watertight. Most of this water escaped through the hole in the bottom but its much better bone dry. The latch went on this past winter and now the weatherstripping.

August 6 - Port Jefferson to Mattituck

We hoisted the main at the mooring at about 8:30 but also used the engine to head north out of Port Jeff, through its wide channel, rather than tack in there. Then northerly winds made the next two hours of our 25 mile eastward passage something of a beam reach and the genoa got to play as well. With full sails, and a bit of help from the tides, we were making speed over ground in excess of two thirds of the apparent wind speed, averaging better than six knots, and without the engines noise. But starting at about 11:00 the winds dropped to behind us and in strength so we had to use the engine the rest of the way. There was a mess in the compartment under the cabinet under the galley sink, which I cleaned up while Lene maintained the watch. She also had the helm from the breakwater up the two mile long bending bayou-like creek to the dock at Strongs Marina. We did this at low tide which made for a nervous time. In the bayou the deep water is not in the center and at times was only five inches below the bottom of our keel. We were on the dock, across from "Blast," Ernie and Camilles big Albin trawler, by 1:30.
This was ILENEs first docking this year except for her initial watering. I worked the afternoon, washing the top of the boat, filling the port water tank and then I caused a very expensive stupid mistake -- by not following the advice I always give to Ilene. "Make sure that the deck fill hole into which you put the water hose says WATER".  Yes, I put the fresh water hose from the dock into the starboard fuel tank. Water being heavier than diesel, it went to the bottom of the tank and pushed a few gallons of diesel fuel out onto the deck and into the water before our neighbor, Bert, yelled that we were spilling fuel. Probably a few gallons, which subjected us to a potential fine and cleanup costs from the Department of Environmental  Protection. I mopped up what I could and did get to the marinas very nice pool to cool off a few minutes before its five PM closure time.
Im sure these guys didnt like my mucking up their home.
I think it was the anticipation of that dip which caused me to not be thinking about the right deck fill. A shower and dinner with our new friends, Bert and Margie of the fast powerboat "Blue Bell" from Mashpee, on the Cape and Florida. Dinner was at Paces Dockside, the restaurant on the marinas grounds. Bert bought a bottle of wine and shared it with me. And another good nights sleep before I had to face the music the next day.

August 7 - Lay Day in Mattituck

The morning was pleasant, with a walk into town to visit the hardware store, post office, book store, grocery, drugstore (for a postcard to send to my granddaughter), cheese store, and wine shop. But the afternoon entailed taking up the entire cabin sole to get to the top opening of the forward fuel tank (where the inoperative fuel gauge is inserted). That hole is inconveniently located directly under the one small piece of the sole that holds all the other pieces together. About 60 1.5" wood screws were removed. John is an excellent mechanic but took three very expensive hours to do what he could have done in a fraction of that time if he had been supplied with a stronger pump attached to larger diameter hoses. Out came the pink diesel fuel and the water, all told about 40 gallons, into five gallon cans which were poured into a fifty five gallon drum that was hauled off to an authorized hazardous waste disposal site. The pumping done, I shooed John out and put the boat back together again myself. Too late for that refreshing dip today. Instead the bitter pill of the bill. Lets just say with the replacement of forty gallons of diesel fuel my mistake cost north of one grand. And I have remarked how proud of myself I am when I accomplish a new task on the boat. So I better fess up about how rotten I feel about a stupid very costly mistake that harmed the environment. I know better and it wont happen again.

Dinner was a pot luck affair at a picnic table in the marina. This would have been better if we had had six or ten boatloads of folks. As it was there was us, Ernie and Camille from "Blast" and Marcia and Mark from "Leeds The Way". 
Marcia is the Clubs current Fleet Captain, a position I held for a few years and that Ernie held for more than 20 years before me.  We love cruising but can do it without the Club, such as our 93 days in Maine last summer. It is sad that those who could benefit from our experience do not avail themselves of this resource. Anyway, there was no shortage of good food and beverages among our tiny group.

August 8 - Mattituck to Seatauket YC, in Port Jefferson Harbor

Underway from 10 to 4:30. We tried to sail and actually did sail a few miles, close hauled, easterly, along the North Shore of L.I. But we tacked to a northerly course and stayed on it too long. Too long because the wind had shifted and we could no longer sail east so we gave it up, keeping the main up for stability and headed directly for the Port Jeff breakwater, with the wind directly in front of us. Turning south to enter the harbor, the wind helped us and we sailed to about 150 yards from the mooring field, headed into the wind, popped the main halyard clutch and expected to hear the familiar "whoosh" of the mainsail tumbling down into its bag. But no whoosh. I went to the mast to tug down on the sails luff. Nothing doing. I told Lene to head back out into the open part of the harbor and watch our depth and for other boats, like this ferry coming out,
while I would get into the bosns chair and she would haul me to the top of the mast (using the spinnaker halyard) where I planned to use pliers to unscrew the shackle and let the sail fall down. Luckily the wind was light, reducing both heeling and our speed. Lene said "Check the mast." Smart girl! Somehow, two loops of the end of the port lazy jack halyard had worked loose from their coil and in fact four lengths of this thinner line had become wedged between the main halyard and the housing of its block at the base of the mast. I managed to get the sail down by pulling the halyard through this block, a few inches and then feet at a time. Once the sail was down and stowed, we were able to take a guest mooring and then came the task of fixing the problem. First I cut the lengths, about 2.5 feet that stuck out from the block. Then I tried pulling the stuck bits out with pliers. I removed the block and its shackle from the base of the mast to make the work easier. Next it was knife, ice pick and pliers, trying to pluck fibers from the errant bits but this was very slow going.

Fluff

Notice how flattened these formerly jammed bits are compared to the width of normal line.
 (If anyone knows how I can get rid of the underlining below, which is unintended, please let me know, thank you.)
I thought to pull the main halyard out of the shackle in the direction I had pulled to get the sail down, to thereby relieve the pressure in the jam. But this would have required use of the snake, to get the line back through its channel under the deck after it was freed. The same snake used earlier on this voyage to repair the reefing line, had been put away in a safe place and could not be found. Lene is the one who always wants things to be put away and I should let her do the putting because she is better at the remembering. In any event, after diligent search, no snake. So another plan was needed. I noticed that the block seemed to be held together with three small Allen bolts and disassembled it. Then everything could be easily removed. A similar jamming had occurred in the block at the clew of the small jib during the passage from Providentiales in the Turks and Caicos to Mayaguana in the Bahamas. Some physicist is going to have to tell me about what force of magnetism draws small lines into the narrow spaces between larger lines and the housings of their blocks.
Free at last.
Roger, Mark, Ernie, Marsha, Lene and Camille -- after ice cream.
Dinner was at La Parilla, good Spanish food, followed by the traditional desert of the Harlem Cruise -- ice cream.

August 9 - Seatauket YC to Harlem YC
Port Jeff waterfront from our mooring; ferry docks to the right.

We got off the mooring at 7:45  and at 8:00. Huh? Well, Lene and I had a "failure to communicate." She did not hear me say "Reverse," to back away form the ball, and took my pointing out where the ball was as a direction to turn toward that side. We drove the boat over the mooring, getting its lines tangled on the propeller. So I got a refreshing early morning salt water dip and got us off in short order, without cutting any lines.  In the harbor we saw about five knots of wind from the north and hoisted the main in anticipation of a beamy starboard reach while we retraced the first days passage, in the opposite direction. We even set the genoa, a couple of times. But the wind died. This time, it being a Saturday, numerous wakes of large high horse-power floating big-ego machines roiled the surface so the main did serve its anti-rocking purpose. A rather boring passage and we were on our mooring at 2:20 and home in our apartment at 4. So, while a lot of things went wrong, everyone got home safely and a good time was had by all.
Read More..

It is getting close! The Metal Boat Festival 2014!

We are a few weeks away from the 2014 Metal Boat Festival! You you have an interest in Metal Boats, I hope to see you there. 


Read More..

Rabu, 24 Februari 2016

Metal Boat Festival 2014 Program

The Metal Boat Festival: The board members have been busy planning this years Metal Boat Festival. We have a good line up of speakers for this year. Below is the program. If interesting in attending visit: http://www.metalboatsociety.com/festivalInfo.htm

If interested in metal boats, this is the place to be. And I can not think of a better place to be in August than Annacortes, Washington, the home of the Metal Boat Fest. A scenic ferry ride will take you to the San Juan Islands, if you are coming to the Fest plan on a trip to the San Juan Islands you will not be disappointed.

Thursday Aug 7, 2014 afternoon Cap Sante Marina
Boats check in with Dockmaster Lance Ekhart – 360-305-5345
3pm – 6pm Set up at the Seafarer’s Memorial Park Building, Anacortes
Come and help us set up for the Festival. Pre-registration is also
available at this time.

Friday Aug 8
Seafarer’s Memorial Park Building

0730 -0800
Sign in and register.
Start the day with tea, coffee, muffins, fruit provided by our breakfast
sponsor – Swiftsure Yachts

8am – 1015 Opening remarks and welcome by MBS President Rod Palanca.
Member introductions – introduce yourself and tell us about your
project. Plenty of time for all to share.

10:30 -
12:00 a.m.
David
Bernhard
-San Diego Rigging.

Dock lines & more
Beginning with dock lines, I am planning on
touching about many aspects of standing and
running rigging. Pros and cons of the different materials and way of
doing things. Though dock lines, tow and anchor bridals, will pretty
much take care of the power boaters. Sailors will be interested in the
entire talk.

12:00 -
1:00 p.m.
Break for lunch
Check out speaker and commercial member displays.
There are a multitude of local restaurants nearby for lunch.

1:00 - 2:00
p.m.
Arthur Barlow Campbell, CPCU, ARM, AMIM

Practical Ideas on Buying Yacht Insurance
Learn about how to insure your metal boat, and
possibly save some money is the process.
• What are some of the pitfalls in insuring your metal boat?
• How to select an agent/broker to insure your metal boat?
• What should I expect from the marine insurance underwriters?
• Will I need a survey on my metal boat, and if so, how to select
a marine surveyor.
• Learn more about obtaining insurance for your metal boat, and
be better prepared if you have a claim.

Art is a graduate of Florida State University (B.S.) with a major in
Insurance and Risk Management. He later earned the following
professional insurance designations, Chartered Property and
Casualty Underwriter (CPCU), Associate in Risk Management (ARM),
and Associate in Marine Insurance Management (AMIM), Art is an
independent agent/broker with Gulfstream Insurance Group, Inc. in
Ft. Lauderdale, FL. He spent 20 years with Liberty Mutual in the
commercial sales department serving as an Account Representative
and later as a Resident Manager. Art has served as an expert witness
and litigation consultant in marine insurance.
He is past president of the Gold Coast CPCU Society as well as the
past president of the Fort Lauderdale Mariners Club. Art is an
approved instructor by the Florida Department of Financial Services
for Inland Marine and Marine Insurance. He taught Marine Insurance
as an adjunct instructor at Broward Community College.
Art has been a speaker at the Metal Boat Society Festival, and Fort
Lauderdale Mariners Club Marine Insurance Seminar. As a member
of the USAF he served as a loadmaster and retired with the rank of
CMSgt. Art owns an Alan Pape designed steel cutter. He has helped
in the delivery of sailboats from the Chesapeake, Bahamas and the
British Virgin Islands.

2.15 – 3.00 Rod Palanca
Boat builder/owner
Simple water systems and water makers

3.15 - 4:30
p.m.
Gary Wellman

1.THRIVE Freezed Dried Foods
2. Air Vent Dryers
3.Space Dryer dehumidifiers
I have been associated with H2Out for the past 1 1/2 years working
with sales and marketing. My background is 25 years in the sales
field.
We will provide food samples for those who are interested in freeze
dried foods which are lighter than canned foods with no
preservatives, require no cutting, peeling, can be prepared in less
than 15 minutes and are perfect for on-board use.

Rich Pindell

“When Good Fuels Go Bad".
This talk contains information about how fuels have changed over the
last 10 years and what we can do to prevent fuel contamination with
the new bio blends on the market.
Rich Pindell of Pindell Engineering, Inc., port Townsend, WA received
the 2012 coveted Pittman Innovation Award for leadership in
developing reusable products for water absorption. His H2Out
Systems prevents mold, mildew, rust, and corrosion damage in fuels,
hydraulic fluids, and interior spaces.


Free time to meet with Speakers and visit our Commercial members
Booths

7 pm
Friday Night - Potluck Dinner at the venue,
Share dinner and swap boat project ideas.
Outdoor concert in the park

August 9th - Saturday

8:00 a.m. Eye Opener – Coffee, tea, cocoa, muffins, and fruits, to start the day,
from our sponsor Swiftsure Yachts

9:00 -
10:15 a.m.
Alison Mazon –
Accredited Marine Surveyor®,
Portland, OR

The Hidden Costs of:
• Messing with a naval architects design
• Non-standard design
• Ignoring ABYC standards

Alison Mazon is a full service marine surveyor, who began surveying
in 1999, and was accredited in 2002, SAMS ® Yacht & Small Craft.
Alison was the VP of testing with SAMS ® from 2008 – 2013.

10:30 -12:00 a.m.
John Simpson – Boat Designer

Topic - Boat Stability
John Simpson has been involved with boats since childhood and this
evolved into a successful career in naval architecture and boat
design. This path has been the long but thorough route – 4 years of
shipyard & technical training, several years of working with other
naval architectures, 3 years with a boat builder doing purchasing,
estimating, mould tooling, outfitting, engine installation, sea trials and
even some design work.

In 1978 John opened his own design office and over the following
years has done over 100 designs for power, sail, pleasure,
commercial and military vessels in a variety of materials for both
domestic and foreign clients. In 1980 he won the Cruising world
magazine’s Design Award for his 42’ cutter ‘Fidelity’. This was a
forerunner of ‘Perelanda” a 43’ round bilge steel sailboat as featured
in the book Steel Away and owned/built by authors LeCain Smith and
Sheila Moir, 2 of the founders of the Metal Boat Society. John was the
2010 Metal Boat Festival’s Designer of the Year and has been a
stalwart supporter of the MBS for many years.

12:00 -
1:00 p.m.
Break for lunch
Check out speaker and commercial member displays

1:00 - 2:15
p.m.
Peter McGonagle – Swiftsure Yachts, Inc

"A profile of two metal boat builders"
Allures/Garcia(aluminum-Europe) and
Waterline Yachts(Steel-Canada). I have
a good supply of photos from both yards of
construction. This is an opportunity for members
to see what a professional yard looks like.

Peter McGonagle grew up sailing in Rhode Island, but has lived and
worked in Seattle, Washington for the last ten years. In 2002 he
started Swiftsure Yachts with two partners. He is a Certified
Professional Yacht Broker and am a licensed Florida yacht broker. He
and his family moved aboard the S/V Charlotte in August of 2007 to
explore the cruising life for a few years, and in July of 2009 I
completed a two year Caribbean cruise with my family aboard
“Charlotte,” a 1991 Robert Perry-designed 51? steel sloop. We’re now
back in Seattle .

2:30 - 4:00
p.m.
Dylan Bailey - Marine Surveyor
Proper Paint Systems For Metal Boats:
From new construction to maintaining an
older boat. Topics to include paint systems,
proper mileage, application techniques and
maintenance.

Dylan grew up in the metal boat building business as the son of
legendary metal boat builder Howdy Bailey. After working on metal
boats for his father he worked for other builders learning about boat
building in wood and fiberglass. He also expanded his knowledge
learning to install and maintain mechanical and electrical systems. In
1991 he started his own Marine Maintenance business and gained
extensive experience refinishing and maintaining boats. During this
time he completed additional off-hour training and has become an
Marine Surveyor which is his current profession.

5-7pm The Boat Walk At the Cap Sante Docks (floating)
and Marina Parking Lot (trailered)

7 pm
Saturday Night Barbecue Dinner at the Floating Party Dock at Cap
Sante Marina
Sponsored by Howdy Bailey Yacht Services

8:30pm
Sunset sail – the chance to be out on a Metal Boat

August 10th - Sunday
8:30 a.m. Coffee tea, cocoa etc...

9:00 -
10:00 a.m.
Metal Boat Society Annual Business Meeting and election of MBS
Officers

10:00 -
12:00 a.m.
Boat Builders Forum
This annual information-packed wrap-up event will include open
discussion of design and construction issues with the professional
panel, so bring your questions.
This years’ panel will include Pete Silva (Iota Metals), John Simpson
(Designer), and Dylan Bailey (Marine Surveyor).

NOONISH FESTIVAL CLOSES!





Read More..

Minggu, 21 Februari 2016

Archipelago Rally 2014

Earwigoagin has been reporting on the exploits of the Tuthill sisters racing their boat-speed challenged Snark in this one-race, come one, come all, Portsmouth handicap event hosted, every November, in a different nook and cranny of Rhode Island coastline.
  • For the Tuthill sisters racing their Snark in the 2012 event, click here.
  • For the Tuthill sisters racing their Snark in the 2013 event, click here.
This year (gasp!) the Tuthill sisters jettisoned their Snark for the race, thinking they had upped their game with a lateen-rigged dink and. as it is frequently fore-ordained when you change a good thing, they unfortunately dropped the rig during the race (looks like the jury-rigged thwart lashing to hold up the mast failed). The younger sister, usually a bored, disinterested observer, was now called to the thankless and ultimately futile duty of becoming a human sidestay. These two documented the race and the disaster in a very amusing video.




Originator Chris Museler was undoubtedly pleased to have +40 boats attend this year (including the hastily splashed Crosby Skimmer Moth). I have lifted some photos from Rufus Van Gruissens album.

The Tuthill sisters with Maharaja in "reef" mode.




My favorite "micro" dinghy, the Cape Cod Frosty.


A catboat and Penquin at the take-out ramp.


This fellow in the Zuma dinghy has a passing facial resemblance to the blogmeister (at least the mustache).



Click here for more photos from the Archipelago Rally Facebook page.

Read More..

Rabu, 10 Februari 2016

Seen at the 2014 Sailboat Show Part 3 the Zim 15

One of the hidden casualties in the ongoing clash between Laser Performance Europes business strategy and the rest of the small boat sailing world has been the virtual stoppage of production of the Vanguard 15, a two-hander racing and recreational dinghy that, since the late 1990s, has sold well in the United States and still has a national presence. As with any vacuum in the market someone will step in and in this case Steve Clark, one of the original team that developed the Vanguard 15, has linked up with Zim boatbuilders to produce his higher-end version of a hiking doublehander, the Zim 15.

Zim Sailing freely admits they are targeting the post-collegiate market with the Zim 15 and it comes with a bunch of modern performance features, albeit at a higher selling price compared to the Vanguard 15. What modern features do you get?
  • A hull designed for higher speeds.
  • Carbon spars.
  • High aspect ratio blades.
  • Roachy Mylar sails.
  • Gnav vang to clear up the forward end of the cockpit.
  • A multi-purchase rig-tensioning system run through the forestay.
  • A bow stem made of high-impact plastic.
  • A dangly whisker pole.
  • A flow-through double bottom cockpit with open transom.
  • Enough cleats in the right positions to make adjustments easier.
Some photos.

Here is the bow bumper which is cleverly molded in during construction so as to be an integral part of the hull.


The Zim 15 has a centerboard for easier launching but the centerboard trunk has grooves in each side so the board can be pulled up and "reefed" in a breeze, just as you would with a daggerboard.


The dangly whisker pole is not seen in the U.S much but is very popular in the U.K. non-spinnaker classes. It resides on the front of the mast when going upwind. To deploy, pull the dangly pole down with its control line. To retract. uncleat the control line and a shock cord returns it to the front of the mast. There is also the multi-purchase forestay tensioner sitting on the foredeck in front of the mast.


The flow-thru double-bottom cockpit with the nifty tilt-up rudder. The hull sports soft-chines as it was also designed for team racing.


The business end of the cockpit. We can see the Gnav vang on top of the boom, the dangly pole, recessed cleats in the wide thwart and plenty of adjustments at the base of the mast.



A computer-rendered sideview of the Zim 15 (lifted from Zim Sailings website).



Read More..